Amravati TMT Bars are Thermo- Mechanically Treated for high yield strength. The process involves the rapid quenching of hot bars through a series of water jets, installed in a TMT Box, after they come out of the last Rolling Mill Stand. The bars are cooled allowing the core and surface temperatures to equalize. The bar core cools down slowly to turn in to a ferrite-rearlite aggregate. The strength of the bars is carefully controlled by optimizing the water pressure for their pearlitic core and the tough surface of tempered marten site, thereby providing an optimum combination of high strength, ductility and toughness. This product has wide use in concrete reinforcement structures, bridges, flyovers, dams, thermal & hydel power projects, industrial structures, high-rise buildings, underground platforms for railways, ports & road transport systems. TMT Bars at Amravati Steel give you the following features:
  1. Enhanced strength combined with high ductility
  2. No strength loss at welded joints
  3. Better high temperature thermal resistance
  4. Easy working at site owing to better ductility and bendability
  5. Savings in steel because against FE-415 available in market we give FE-450 steel.
  6. Thermal and earthquake resistance
  7. Good weldability

Properties - Amravati TMT Bars
 
Chemical Properties
Compounds Range as per ISI
(Fe 415)
Range of Amravati
TMT Saria
Carbon 0.30 Max. 0.25 Max.
Manganese - 0.50-0.60
Sulphur 0.060 Max. 0.050 Max.
Phosphorus 0.060 Max. 0.045 Max.
Sulphur+Phosphorus 0.110 Max. 0.95 Max.
 
Size Normal Weight**
(Kg./metre)
Range of Weight
(Kg./metre)
08mm 0.395 0.367-0.423
10mm 0.617 0.574-0.660
12mm 0.888 0.844-0.832
16mm 1.580 1.501-1.659
20mm 2.470 2.396-2.544
25mm 3.850 3.734-3.965
28mm 4.830 4.685-4.975
32mm 6.310 6.121-6.499
 
Parameter Yield Strength
Mpa
Tensile Strength
Mpa
Elongation
%
IS-1786 Fe 415 415 min 450 min 14.5
IS-1786 TMT 450 450 min 485 min 13.5
IS-1786 Fe 500 500 min 525 min 12
 
Parameter
Size
Bend Upto
22mm
Rebend Upto
22mm
Rebend Upto
10mm
Bend Over
10mm
IS-1786 Fe 415 415 min 450 min   14.5
Amravati TMT 415 450 min 485 min   13.5
IS-1786 Fe 500 500 min 525 min   12
 
* Typical Values d = diamter of Bar

* Amravati TMT Fe 500 is produced against specific orders.
** Weight tolerances as per IS: 1786/85. However, we are supplying bars with much closer tolerance than the specification.
About Aar Aar Casting
Company Profile
Composite Steel Unit
International Quality
TMT Advantage
Products
Amravati TOR Bars
Amravati TMT Bars
Amravati Wire Rods
Customer Satisfaction
Amravati Steel Commitment
Photo Gallery
Downloads
 
Amravati Group Web Mail